Degradation in the nozzle materials of subscale motor in a static firing test
Keywords:
VLM-1, Ensaio de queima, Motor-teste cigarro, Inserto de grafiteAbstract
This work presents the study conducted at the Institute of Space and Aeronautics, an organization of the Department of Science and Aerospace Technology (DCTA-IAE, in the Portuguese acronym), to investigate the erosion of the thermal protection, nozzle throat insert, and thermal protection of the convergent manufactured in EPDM rubber of the convergent section of the nozzle, during the sub scale solid propellant rocket motor static firing test. During this study, tests were conducted in order to evaluate the performance of the nozzle ablation of insert material and also of the rubber to protect thermally the metallic motor case and also to the convergent, in addition to verifying the functionality of the adhesion between the propellant and the rubber. For the work herein presented, specifically, only the results inherent to the evaluation of the nozzle insert material and the deterioration of the EDPM rubber in the interface with the conducted in order to evaluate the performance of nozzle ablation of insert material, and also of the rubber to protect thermally the metallic motor case and also to the convergent, in addition to verifying the functionality of the adhesion between the propellant and the rubber. For the work herein presented, specifically, only the results inherent to the evaluation of the nozzle insert material and the degradation of the EDPM rubber in the interface with the graphite material insert for a test time of 56 s will be analyzed. After the tests, non-conformities were detected in components of the engine that subsequently led to a careful analysis of the reasons, as well as to the implementation of solutions for the redesign of components with the aim of improving the safety and assuring the structural integrity of the rocket engine for further tests.
References
DANIEL, I. M.; ISHAI, O. Engineering mechanics of composite materials. New York: Oxford University Press, 1994
GONÇALVES, A. Caracterização de materiais termoestruturais a base de compósitos de carbono reforçados com fibras de carbono (CRFC) e carbonos modificados com carbeto de silício (SiC). 2008. 226 f. Tese (Doutorado)-Curso de Pós-Graduação em Engenharia Mecânica e Aeronáutica, Instituto Tecnológico de Aeronáutica, São José dos Campos, SP, 2008.
KRATSCH, K. M.; EITMAN, D. A. Method for fabricating a reinforced composite. United States patent US 4252588, 24 Feb. 1981.
MAISTRE, M. A. Development of a 4D reinforced carbon-carbon composite. American Institute of Aeronautics and Astronautics (AIAA), p. 76-607, 1976.
MCALLISTER, L. E.; LACHMAN, W. L. Multidirectional carbon-carbon composites. In: HANDBOOK of composite. New York: Elsevier Science Publishers, 1983. v. 4. p. 109-175.
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION. Advanced composite materials – vehicle design criteria. 1974. Report SP8108.
PARDINI, L. C.; GONÇALVES, A. Processamento de compósitos termoestruturais de carbono reforçado com fibras de carbono. Journal of Aerospace Technology and Management, São Paulo, v. 1, n. 2, p. 231-241, July/Dec. 2009.
REIS, R. I.; SHIMOTE; W. K. Ensaios da primeira configuração de motores testes com propelente PC01 e inserto de grafite para testes de desenvolvimento da tubeira e proteções térmicas do motor S50 do veículo Lançador de Microssatélites (VLM-1). São José dos Campos – SP: Instituto de Aeronáutica e Espaço, 2014. Relatório de Ensaio (DCTA/IAE) n. 593-111200/E0001.
______. Ensaios da segunda configuração de motores testes para desenvolvimento de insertos de tubeira e proteções térmicas do motor S50. São José dos Campos – SP: Instituto de Aeronáutica e Espaço, 2015. Relatório de Ensaio (DCTA/IAE) n. 001/APE/2015.
SCIAMARELI, J.; TAKAHASHI, M. F. K.; TEIXEIRA, J. M. Propelente sólido compósito polibutadiênico: I- influência do agente de ligação. Química nova, v. 25, n. 1, p. 107-110, 2002.
SUTTON, G. P. Rocket propulsion elements. 8. ed. New York: Wiley, 1992.
TORRES, M. F. C. et al. Propulsão líquida no IAE: visão das atividades e perspectivas futuras. Journal of Aerospace Technology and Management, São Paulo, v. 1, n. 1, p. 99-106, jan./jun. 2009.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 The Journal of the University of the Air ForceRevista da UNIFA permite que o (s) autor (es) mantenha(m) seus direitos autorais sem restrições. Atribuição-NãoComercial 4.0 Internacional (CC BY-NC 4.0) - Revista da UNIFA é regida pela licença CC-BY-NC
